Home › Forums › Hardware › Correct wiring for H-bridge configuration on FCG

Viewing 2 reply threads
  • Author
    Posts
    • mathewgrabaumathewgrabau
      Participant
      April 14, 2025 at 4:16 pm
      Post count: 10
      #19694

      Good afternoon,

      I want to confirm the correct wiring of the FCG for the H-Bridge configuration. According to the documentation, the LSO side has both the flyback diode and the low side of the bridge. So, the H/L pair should be connected in wiring (flyback) and the standard configuration (high/low legs of the bridge/motor connections).

      Is my reading and interpretation of the documentation correct?

      Thanks,
      Mathew

    • mathewgrabaumathewgrabau
      Participant
      April 15, 2025 at 10:06 am
      Post count: 10
      #19696

      Sorry, a follow-up reply is not required anymore. My test was successful.

    • rhyse.maryniukRhyse Maryniuk
      Keymaster
      April 15, 2025 at 11:00 am
      Post count: 13
      #19697

      Thanks for confirming.

      Best,

      Rhyse

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.