[Tom Stallard]

in reply to: HSO and LSO Feedbacks #21496

We had a look at the guide. The table mentions reading the voltage on the ADC pin when the HSO pin is shorted to Vcc or GND. The observation here is that the ADC values are not changing. I can confirm that the other ADCs in ADC0 instance works but the HSO FB does not update when the HSO pin is shorted to Vcc or GND.

Similar is the case with LSO, by default the digital feedbacks assigned for each LSO shows 1 that means it is operating correctly, but when shorted to Vcc, the status does not update.

[Tom Stallard]

in reply to: Model Build Behavior with audesse-blocks 2.1 vs 2.0 #21485

Hi Connor,

We managed to solve this issue. Turned out it worked in another laptop with MATLAB 2025. I was trying on MATLAB 2024a.

Thanks,
Tom

[Tom Stallard]

in reply to: Model Build Behavior with audesse-blocks 2.1 vs 2.0 #21482

Hi Connor,

I have tried with Audesse Blocks v2.2 and getting the following error:

c:/users/tom/appdata/roaming/mathworks/matlab_add-ons/toolboxes/nxp_mbdtoolbox_s32k3/tools/build_tools/gcc_v10.2/gcc-10.2-arm32-eabi/bin/../lib/gcc/arm-none-eabi/10.2.0/../../../../arm-none-eabi/bin/real-ld.exe: ../ASW.elf section .int_results' will not fit in regionint_sram_results’
c:/users/tom/appdata/roaming/mathworks/matlab_add-ons/toolboxes/nxp_mbdtoolbox_s32k3/tools/build_tools/gcc_v10.2/gcc-10.2-arm32-eabi/bin/../lib/gcc/arm-none-eabi/10.2.0/../../../../arm-none-eabi/bin/real-ld.exe: Memory for standby ram overflow
c:/users/tom/appdata/roaming/mathworks/matlab_add-ons/toolboxes/nxp_mbdtoolbox_s32k3/tools/build_tools/gcc_v10.2/gcc-10.2-arm32-eabi/bin/../lib/gcc/arm-none-eabi/10.2.0/../../../../arm-none-eabi/bin/real-ld.exe: Memory for standby ram overflow
c:/users/tom/appdata/roaming/mathworks/matlab_add-ons/toolboxes/nxp_mbdtoolbox_s32k3/tools/build_tools/gcc_v10.2/gcc-10.2-arm32-eabi/bin/../lib/gcc/arm-none-eabi/10.2.0/../../../../arm-none-eabi/bin/real-ld.exe: section .non_cacheable_data LMA [00481008,0048100f] overlaps section .sram_data LMA [00481008,00486eab]
c:/users/tom/appdata/roaming/mathworks/matlab_add-ons/toolboxes/nxp_mbdtoolbox_s32k3/tools/build_tools/gcc_v10.2/gcc-10.2-arm32-eabi/bin/../lib/gcc/arm-none-eabi/10.2.0/../../../../arm-none-eabi/bin/real-ld.exe: region `int_sram_results’ overflowed by 256 bytes

Let me know if there are any further optimisation settings i should take care of in model settings to avoid this. Currently I am at Maximum (Balance RAM and Speed).

Thanks,
Tom

[Tom Stallard]

in reply to: Model Build Behavior with audesse-blocks 2.1 vs 2.0 #21331

Hi Connor,

– Definitely the path does not have spaces
– Embedded Coder support package for Arm Cortex-M was already installed

I will wait for you to release the v2.2 blocks and give a shot at it again.

[Tom Stallard]

in reply to: Model Build Behavior with audesse-blocks 2.1 vs 2.0 #21324

Hi Connor,

– Will check for moving average blocks and update
– FreeMasteroverCAN
– We are on MBDT 1.7 and previous versions were uninstalled
– MATLAB 2024a will be shifting to 2025a soon

[Author]

Posts